Key takeaways
- A 60cm integrated (fully built-in, visor-style) cooker hood that slides under a cabinet suits most standard UK/EU kitchen layouts, a telescopic or…
A 60cm integrated (fully built-in, visor-style) cooker hood that slides under a cabinet suits most standard UK/EU kitchen layouts, a telescopic or slide-out hood suits kitchens that want the extraction hidden until needed, and a canopy-style integrated hood suits anyone retrofitting into an existing 60cm cabinet opening without changing the cabinetry.
“Integrated” cooker hoods are built to disappear into a kitchen cabinet rather than hang visibly like a chimney or island hood, and the 60cm width matches the standard UK/EU hob and cabinet module. Picking the right one mostly comes down to extraction power, ducted versus recirculating operation, and noise level, since all integrated hoods look similar once installed.
Main Types of 60cm Integrated Hoods
- Visor (pull-out) hoods: A flat panel that slides out from under the cabinet when in use and pushes back in when not needed. The most common integrated style for standard kitchens.
- Telescopic hoods: Similar to visor hoods but with a telescopic front section that extends further forward over the hob, giving better coverage for taller cabinets.
- Canopy/box-standard hoods: A simpler fixed unit that sits inside the cabinet space with a visible control panel; typically the most budget-friendly integrated option.
Ducted vs Recirculating Operation
This is the single biggest functional choice for any cooker hood, integrated or not:
- Ducted (extraction) mode: Vents cooking air outside through ducting. Removes grease, steam, and odor from the kitchen entirely. Requires an external wall or roof vent and suitable ducting run.
- Recirculating (recycling) mode: Draws air through a grease filter and a carbon filter, then releases it back into the kitchen. No ducting needed, but carbon filters need periodic replacement and odor removal is generally less effective than ducted mode.
Many 60cm integrated hoods support both modes with the right filter kit, but the carbon filter kit for recirculating mode is sometimes sold separately, so this is worth checking before buying if ducting to outside is not possible.
Key Specs to Compare
- Extraction rate (m³/h): the maker’s stated air volume moved per hour; kitchens with gas hobs or heavy frying generally benefit from a higher stated extraction rate than a kitchen with a single electric hob.
- Noise level (dB): stated at various fan speeds; the quietest setting is used most often, but the maximum-speed noise level matters for anyone who regularly needs full extraction.
- Number of fan speeds and boost function: most hoods offer 2-3 speeds plus a timed boost for heavy cooking, after which it reverts automatically.
- Filter type and cleaning: metal grease filters are usually dishwasher-safe and reusable; carbon filters for recirculating mode are consumable and need replacing on the schedule the maker lists.
- Control type: slider, push-button, or touch controls; push-button and touch controls are generally easier to wipe clean of grease than textured sliders.
At a Glance Comparison
| Type | Best For | Key Stated Specs | Limits |
|---|---|---|---|
| Visor (pull-out) | Standard kitchens, straightforward retrofit | Slide-out panel, 2-3 fan speeds, ducted/recirculating options | Coverage limited to panel width when retracted |
| Telescopic | Taller cabinets, wider hob coverage | Extending front panel, boost function common | Slightly more moving parts than a fixed visor |
| Canopy (fixed) | Budget retrofits, simple installs | Fixed extraction opening, basic control panel | No retractable panel; less flexible coverage |
Pick X If…
| Situation | Recommended Type |
|---|---|
| Standard 60cm cabinet, want the easiest retrofit | Visor (pull-out) integrated hood |
| Tall wall units or wide hob, want maximum coverage | Telescopic integrated hood |
| Tight budget, simple kitchen layout | Canopy (fixed) integrated hood |
| No external wall access for ducting | Any model set up for recirculating mode with a carbon filter kit |
| Gas hob or frequent heavy frying | A model with a higher stated extraction rate (m³/h) and ducted operation |
Fit and Installation Notes
60cm refers to the cabinet width the hood is designed to fit, not the hob width directly, though the two are usually matched in standard kitchens. Before buying, confirm the cabinet’s internal depth and height clearance against the hood’s installation manual, since integrated hoods mount using brackets inside the cabinet carcass rather than hanging freely. For ducted installs, check that the ducting diameter the hood uses matches existing ductwork or the vent kit being purchased, and that the duct run length and number of bends stay within what the maker recommends, since long runs with many bends reduce extraction performance. Electrical connection should follow the maker’s manual, and any hardwired installation (rather than plug-in) should be done by a qualified electrician.
Alternatives to Consider
- Island or chimney hood: for open-plan kitchens without a cabinet above the hob to integrate into; trades the hidden look for stronger extraction and a visible design feature.
- Downdraft extractor: rises from behind or beside the hob instead of mounting overhead, useful for kitchen islands with no overhead cabinet at all.
- Recirculating hood with carbon filter upgrade kit: worth considering specifically for rentals or kitchens where external ducting cannot be installed.
Lighting and Lower-Noise Features
Most 60cm integrated hoods include built-in lighting over the hob, typically LED strips or spot lights controlled separately from the fan. LED lighting draws less power and runs cooler than older halogen setups, and the maker’s stated lumen output or bulb count gives a rough sense of how well the hob area will be lit for everyday cooking. Some models also advertise a specific lower-noise or “night” fan setting, aimed at light simmering or reheating tasks where full extraction power is unnecessary. Buyers sensitive to kitchen noise, particularly in open-plan homes where the kitchen is not separated from a living or dining area, may find this quieter setting useful far more often than the boost function.
Energy Use and Running Cost
Cooker hoods are generally rated with an energy label or efficiency class by the maker, reflecting fan motor efficiency and lighting type. Running cost over the life of the appliance is usually modest compared with other kitchen appliances, since the hood only draws significant power while the fan is active, but buyers comparing several similar-looking models may still find it useful to check the stated energy class as a tiebreaker, especially for recirculating models that may run more frequently to compensate for lower extraction efficiency compared with ducted operation.
Frequently Asked Questions
What is the difference between a 60cm and a 70cm or 90cm hood?
The number refers to the width of the hood body, which should match or exceed the hob width it sits above for effective extraction. A 60cm hood is sized for standard UK/EU 60cm hob and cabinet modules; wider hobs generally pair better with a 70cm or 90cm hood for full coverage.
Can an integrated hood be fitted without ducting to outside?
Yes, most 60cm integrated hoods can run in recirculating mode using a carbon filter instead of external ducting, though the carbon filter kit is sometimes an additional purchase. Odor removal in this mode is generally considered less effective than ducted extraction, which matters more in kitchens with frequent strong-smelling cooking.
How often do the filters need cleaning or replacing?
Metal grease filters are typically reusable and can usually go through a dishwasher cycle or be hand-washed on a schedule the maker specifies, often monthly with regular cooking. Carbon filters used in recirculating mode are consumable and should be replaced on the interval stated in the manual, since a saturated carbon filter stops absorbing odor effectively.
How loud are integrated cooker hoods at full speed?
Noise level varies by model and is stated in decibels (dB) by the maker, usually with a range from the lowest to the boost/maximum speed. Buyers sensitive to kitchen noise should compare the maximum-speed dB figure specifically, since that is the setting used during heavy cooking when extraction matters most.
Does a 60cm integrated hood need a qualified electrician to install?
Many integrated hoods connect via a standard plug socket inside the cabinet, which does not require an electrician, but any hardwired connection to the mains should be done by a qualified electrician in line with local electrical regulations. The maker’s installation manual will specify which connection type the model uses.
What extraction rate is enough for a typical home kitchen?
There is no single number that fits every kitchen, since room size, hob type, and cooking style all affect what is needed; the maker’s stated extraction rate (m³/h) should be compared against similar-sized hoods rather than judged in isolation. Kitchens with gas hobs or frequent frying generally do better with a hood toward the higher end of the extraction range for its size class.
Read next
- Best 24 Inch Wall Mount Range Hood: Picks and What to Look For (2026)
- Best 8 Ohm Dummy Load: Picks and What to Look For (2026)
- Best Cerradura Electrica Para Puerta: Picks and What to Look For (2026)
- Best Cake Domes Premium: Picks and What to Look For (2026)
- Best 6 Recessed LED Retrofit: Picks and What to Look For (2026)